UPD係列超快光電探測（cè）器非常適合從DC-25GHz光波形探測。用戶可選型號有短（duǎn）至15ps上升時間，光譜範圍（wéi）高達170-2600 nm。
所有光電探（tàn）測器封裝在緊湊固體鋁外殼之內，可選電池或適配器供電。
UV-拓展版本矽超快光電探測器是市（shì）場上唯一商業化的光譜範圍覆蓋170-1100 nm的超快光電探測器。
另一類型UV-敏感InGaAs 超快光電探測器非常適合探測（cè）光譜範圍：350-1700 nm的脈衝（chōng）激光器, 具有市場上（shàng）最寬的光譜範圍、最快速響應。
完美的阻抗匹配和（hé）德國最先進微波技術保證（zhèng）了脈衝（chōng）波形測試（shì）不受震（zhèn）動及紋波幹擾（rǎo）。可自由使（shǐ）用50 Ω 接地電阻為最高速（sù）操（cāo）作，或者一個高（gāo）阻抗負載（zǎi）獲得更大信號。最大保障了這些探測器使用靈活性。
與我們BBA係列（liè）寬帶高（gāo）增益放大器組合，超快速光電探測器有利於替代昂（áng）貴的雪崩（bēng）光（guāng）電（diàn）二極管探（tàn）測器。
UPD 係列超快光電探測器是激光、光子研究等（děng）領域不可或缺的工具。
新光電探測器模塊: 更快的上升時間 & 更寬的波長範圍
UPD-15-IR2-FC: 超快InGaAs PIN光電探測器, 上升時（shí）間<15 ps, 帶寬 >25GHz, 光譜範圍（wéi）800-1700nm, 光纖耦合輸入，FC/APC連接器。
UPD-35-IR2-P, UPD-35-IR2-D: 超快InGaAs PIN光電探測器, 上升時間（jiān）<35ps, 帶寬>10GHz, 光譜範圍（wéi）800-1700nm, 拋光或擴（kuò）散窗口
UPD-35-UVIR-P, UPD-35-UVIR-D: 超快InGaAs PIN光電探測器, 上升時間<35ps, 帶寬>10GHz,光譜範圍350-1700nm, 拋（pāo）光或（huò）擴散窗口
UPD-50-SP, UPD-50-SD, UPD-50-UD, UPD-50-UP:超（chāo）快Si PIN光電探測器, 上（shàng）升/下降時（shí）間50ps, 帶寬>7GHz,光譜範圍170-1100nm , 320-1100nm, 拋光或擴散窗口
UPD-100-IR1-P:超快Ge光電探測器（qì）, 上升時間<100ps, 脈寬(FWHM)300ps, 光譜範圍400-2000nm
UPD-3N-IR2-P:快速InGaAs光電探測器, 拓展（zhǎn）紅外波長範圍高達2.1 µm, 上升時間150ps
UPD-5N-IR2-P: 快速InGaAs光電探測器, 拓展紅外波長範圍高達2.6 µm, 上升時間200ps
產品可選係列：
|
Item |
Part Number | DESCRIPTION |
| Ultrafast Photodetectors: UPD Series | ||
| 1 | UPD-10-IR2-FR |
NEW! Ultrafast InGaAs Photodetector with fiber receptacle,
rise time typ. 10 ps, bandwidth > 32 GHz, spectral range: 900 … 1650 nm, fiber receptacle: FC/PC connector.
2.92 mm K-connector for electrical signal output. Universal power supply 100 … 230 V AC included.
|
| 2 | UPD-15-IR2-P |
NEW! Ultrafast InGaAs Photodetector,
rise time typ. 15 ps, bandwidth > 25 GHz, spectral range
800 … 1700 nm, for free-space beam, polished glass window, SMA connector for the RF output.
Needs +5 VDC supply.
|
| 3 | UPD-15-IR2-FC |
Ultrafast InGaAs Photodetector,
rise time typ. 15 ps, bandwidth > 25 GHz, spectral range 800 … 1700 nm, 1 m long SM fiber, with FC/APC, SMA
connector for the RF output. Not compatible with the optional filter holder.
Needs +5 VDC supply.
|
| 4 | UPD-15-UVIR-FC |
Ultrafast InGaAs Photodetector,
rise time typ. 15 ps, bandwidth > 25 GHz, spectral range 350 … 1700 nm, 1 m long SM fiber, with FC/APC, SMA connector for the RF output. Not compatible with the optional filter holder.
Needs +5 VDC supply.
|
| 5 | UPD-35-IR2-P |
Ultrafast InGaAs Photodetector, rise time typ. 35 ps, bandwidth > 10 GHz, spectral range 800 … 1700 nm,
polished glass window, SMA connector for the RF output. Needs +12 VDC supply or bias battery.
|
| 6 | UPD-35-IR2-D |
Ultrafast InGaAs Photodetector, rise time typ. 35 ps, bandwidth > 10 GHz, spectral range 800 … 1700 nm, crystal quartz diffuse window (recommended for high peak power lasers only), SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 7 | UPD-35-UVIR-D |
Ultrafast InGaAs Photodetector, rise time typ. 35 ps, bandwidth > 10 GHz, spectral range 350 … 1700 nm, crystal quartz diffuse window (recommended for high peak power lasers only), SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 8 | UPD-35-UVIR-P |
Ultrafast InGaAs Photodetector, rise time typ. 35 ps, bandwidth > 10 GHz, spectral range 350 … 1700 nm,
polished window MgF2, SMA connector for the RF output. Needs +12 VDC supply or bias battery.
|
| 9 | UPD-35-IR2-FR-S |
Ultrafast InGaAs Photodetector, rise time typ. 35 ps, bandwidth > 10 GHz, spectral range 800 … 1700 nm, SMA receptacle, SMA connector for the RF output. Not compatible with the optional filter holder.
Needs +12 VDC supply or bias battery.
|
| 10 | UPD-35-IR2-FR-F |
Ultrafast InGaAs Photodetector, rise time typ. 35 ps, bandwidth > 10 GHz, spectral range 800 … 1700 nm, FC/PC receptacle, SMA connector for the RF output. Not compatible with the optional filter holder.
Needs +12 VDC supply or bias battery.
|
| 11 | UPD-35-UVIR-FC-A |
Ultrafast InGaAs Photodetector, rise time typ. 35 ps, bandwidth typ. > 10 GHz, spectral range 350 … 1700 nm,
with SMF-28 fiber 1 m length, with FC/APC, SMA connector for the RF output. Needs +12 VDC supply or bias battery.
|
| 12 | UPD-35-IR2-FC |
Ultrafast InGaAs Photodetector, rise time typ. 35 ps, bandwidth typ. > 10 GHz, spectral range 800 … 1700 nm,
with SMF-28 fiber 1 m length, with FC/APC, SMA connector for the RF output. Not compatible with the optional filter holder.
Needs +12 VDC supply or bias battery.
|
| 13 | UPD-35-UVIR-FR-P |
Ultrafast InGaAs Photodetector, rise time typ. 35 ps, bandwidth typ. > 10 GHz, spectral range 350 … 1700 nm, with FC/PC fiber receptacle, SMA connector for the RF
output. Needs +12 VDC supply or bias battery.
|
| 14 | UPD-40-IR2-P |
Ultrafast InGaAs Photodetector, rise time typ. 40 ps, bandwidth > 8.5 GHz, spectral range 800 … 1700 nm,
polished glass window, SMA connector for the RF output. Needs +12 VDC supply or bias battery.
|
| 15 | UPD-40-IR2-D |
Ultrafast InGaAs Photodetector, rise time typ. 40 ps, bandwidth > 8.5 GHz, spectral range 800 … 1700 nm, crystal quartz diffuse window (recommended for high peak power lasers only), SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 16 | UPD-40-UVIR-D |
Ultrafast InGaAs Photodetector, rise time typ. 40 ps, bandwidth > 8.5 GHz, spectral range 350 … 1700 nm, crystal quartz diffuse window (recommended for high peak power lasers only), SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 17 | UPD-40-UVIR-P |
Ultrafast InGaAs Photodetector, rise time typ. 40 ps, bandwidth > 8.5 GHz, spectral range 350 … 1700 nm,
polished window MgF2, SMA connector for the RF output. Needs +12 VDC supply or bias battery.
|
| 18 | UPD-40-IR2-FR-S |
Ultrafast InGaAs Photodetector, rise time typ. 40 ps, bandwidth > 8.5 GHz, spectral range 800 … 1700 nm, SMA receptacle, SMA connector for the RF output. Not compatible with the optional filter holder.
Needs +12 VDC supply or bias battery.
|
| 19 | UPD-40-IR2-FR-F |
Ultrafast InGaAs Photodetector, rise time typ. 40 ps, bandwidth > 8.5 GHz, spectral range 800 … 1700 nm, FC/PC receptacle, SMA connector for the RF output. Not compatible with the optional filter holder.
Needs +12 VDC supply or bias battery.
|
| 20 | UPD-40-IR2-FC |
Ultrafast InGaAs Photodetector, rise time typ. 40 ps, bandwidth > 8.5 GHz, spectral range 800 … 1700 nm,
with 1 m long SMF-28 fiber, with FC/APC, SMA connector for the RF output. Not compatible with the optional filter holder. Needs +12 VDC supply or bias battery.
|
| 21 | UPD-50-SP |
Ultrafast Si Photodetector, rise time typ. 50 ps, bandwidth
> 7.0 GHz, spectral range 320 … 1100 nm, polished window, SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 22 | UPD-50-SD |
Ultrafast Si Photodetector, rise time typ. 50 ps, bandwidth
> 7.0 GHz, spectral range 320 … 1100 nm, crystal quartz diffuse window (recommended for high peak power lasers only), SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 23 | UPD-50-UD |
Ultrafast Si Photodetector, rise time typ. 50 ps, bandwidth
> 7.0 GHz, spectral range 170 … 1100 nm, crystal quartz diffuse window (recommended for high peak power lasers only), SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 24 | UPD-50-UP |
Ultrafast Si Photodetector, rise time typ. 50 ps, bandwidth
> 7.0 GHz, spectral range 170 … 1100 nm, polished window MgF2, SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 25 | UPD-50-SP-FR-F |
Ultrafast Si Photodetector, rise time typ. 50 ps, bandwidth
> 7.0 GHz, spectral range 320 … 1100 nm, polished window,
with fiber receptacle FC/PC, SMA connector for the RF output. Needs +12 VDC supply or bias battery.
|
| 26 |
UPD-50-UP
+
UPD-40-IR2-P
|
SPECIAL PACKAGE of TWO Ultrafast Photodetectors (Si and InGaAs), rise time typ. 40 ps, bandwidth > 8.5 GHz for UPD-40-IR2-P and rise time typ. 50 ps for UPD-50-UP, bandwidth typ. 7.0 GHz for UPD-50-UP. The combination covers the spectral range 170 … 1700 nm, polished windows, SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 27 | UPD-70-IR2-P |
Ultrafast InGaAs Photodetector, rise time typ. 70 ps, bandwidth > 5.0 GHz, spectral range 800 … 1700 nm, polished window, SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 28 | UPD-70-IR2-D |
Ultrafast InGaAs Photodetector, rise time typ. 70 ps, bandwidth > 5.0 GHz, spectral range 800 … 1700 nm, crystal quartz diffuse window (recommended for high peak power lasers only), SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 29 | UPD-70-UVIR-D |
Ultrafast InGaAs Photodetector, rise time typ. 70 ps, bandwidth > 5.0 GHz, spectral range 350 … 1700 nm, crystal quartz diffuse window (recommended for high peak power lasers only), SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 30 | UPD-70-UVIR-P |
Ultrafast InGaAs Photodetector, rise time typ. 70 ps, bandwidth > 5.0 GHz, spectral range 350 … 1700 nm, polished window MgF2, SMA connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 31 | UPD-70-IR2-FR-S |
Ultrafast InGaAs Photodetector, rise time typ. 70 ps, bandwidth > 5.0 GHz, spectral range 800 … 1700 nm, SMA receptacle, SMA connector for the RF output. Not compatible with the optional filter holder.
Needs +12 VDC supply or bias battery.
|
| 32 | UPD-70-IR2-FR-F |
Ultrafast InGaAs Photodetector, rise time typ. 70 ps, bandwidth > 5.0 GHz, spectral range 800 … 1700 nm, FC/PC receptacle, SMA connector for the RF output. Not compatible with the optional filter holder.
Needs +12 VDC supply or bias battery.
|
| 33 | UPD-70-IR2-FC |
Ultrafast InGaAs Photodetector, rise time typ. 70 ps, bandwidth > 5.0 GHz, spectral range 800 … 1700 nm,
with 1 m long SMF-28 fiber, with FC/APC, SMA connector for
the RF output. Not compatible with the optional filter holder. Needs +12 VDC supply or bias battery.
|
| 34 | UPD-100-IR1-P |
Ultrafast Ge-doped-Photodetector, rise time typ. 100 ps, bandwidth > 3.0 GHz, pulse width (FWHM) 300 ps,
spectral range 400 … 2000 nm, dark current typ. 700 nA, active area 80 µm diameter, polished window, SMA connector for the RF output, negative output.
Needs -12 VDC negative supply or bias battery.
|
| 35 | UPD-200-SP |
Ultrafast Si Photodetector, rise time typ. 175 ps, bandwidth typ. 2.0 GHz, spectral range 320 … 1100 nm, polished window, BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 36 | UPD-200-SD |
Ultrafast Si Photodetector, rise time typ. 175 ps,
bandwidth typ. 2.0 GHz, spectral range 320 … 1100 nm, crystal quartz diffuse window (recommended for high peak power lasers only), BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 37 | UPD-200-UD |
Ultrafast Si Photodetector, rise time typ. 175 ps,
bandwidth typ. 2.0 GHz, spectral range 170 … 1100 nm, crystal quartz diffuse window (recommended for high peak power lasers only), BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 38 | UPD-200-UP |
Ultrafast Si Photodetector, rise time typ. 175 ps, bandwidth typ. 2.0 GHz, spectral range 170 … 1100 nm,
polished window MgF2, BNC connector for the RF output. Needs +12 VDC supply or bias battery.
|
| 39 | UPD-300-SP |
Ultrafast Si Photodetector, rise time typ. 300 ps, bandwidth typ. 1.0 GHz, spectral range 320 … 1100 nm, polished window, BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 40 | UPD-300-SD |
Ultrafast Si Photodetector, rise time typ. 300 ps,
bandwidth > 1.0 GHz, spectral range 320 … 1100 nm, crystal quartz diffuse window (recommended for high peak power lasers only), BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 41 | UPD-300-UD |
Ultrafast Si Photodetector, rise time typ. 300 ps,
bandwidth > 1.0 GHz, spectral range 170 … 1100 nm, crystal quartz diffuse window (recommended for high peak power lasers only), BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 42 | UPD-300-UP |
Ultrafast Si Photodetector, rise time typ. 300 ps,
bandwidth > 1.0 GHz, spectral range 170 … 1100 nm, polished window MgF2, BNC connector.
Needs +12 VDC supply or bias battery.
|
| 43 | UPD-500-SP |
Ultrafast Si Photodetector, rise time typ. 500 ps,
bandwidth > 0.6 GHz, spectral range 320 … 1100 nm, polished window, BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 44 | UPD-500-SD |
Ultrafast Si Photodetector, rise time typ. 500 ps,
bandwidth > 0.6 GHz, spectral range 320 … 1100 nm, crystal quartz diffuse window (recommended for high peak power lasers only), BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 45 | UPD-500-UD |
Ultrafast Si Photodetector, rise time typ. 500 ps,
bandwidth > 0.6 GHz, spectral range 170 … 1100 nm, crystal quartz diffuse window (recommended for high peak power lasers only), BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 46 | UPD-500-UP |
Ultrafast Si Photodetector, rise time typ. 500 ps,
bandwidth > 0.6 GHz, spectral range 170 … 1100 nm, polished window MgF2, BNC connector for the RF output.
Needs +12 VDC supply or bias battery.
|
| 47 | UPD-3N-IR2-P |
Exclusively from ALPHALAS! Greatly improved performance!
Ultrafast InGaAs PIN Photodetector, rise time typ. 150 ps, FWHM typ. 1 ns, bandwidth > 400 MHz,
spectral range 800 … 2100 nm, polished window, BNC connector for the RF output. Needs +5 VDC supply or bias battery.
|
| 48 | UPD-5N-IR2-P |
Exclusively from ALPHALAS! Greatly improved performance!
Ultrafast InGaAs PIN Photodetector, rise time typ. 200 ps, FWHM typ. 1 ns, bandwidth > 300 MHz,
spectral range 800 … 2600 nm, polished window, BNC connector for the RF output. Needs +5 VDC supply or bias battery.
|
| 49 | UPD-2M-IR2-P |
Ultrafast InGaAs PIN Photodetector, rise time typ. 75 ns, bandwidth > 250 MHz, spectral range 900 … 1700 nm, sensitive area 2 mm diameter, polished window, BNC
connector for the RF output. Needs +5 VDC supply or bias battery.
|
| 50 | UPD-2M-IR2-P-TEC |
Ultrafast InGaAs PIN Photodetector, rise time typ. 75 ns, bandwidth > 250 MHz, spectral range 900 … 2570 nm, sensitive area 0.3 mm diameter, polished window, BNC
connector for the RF output. One-stage TEC cooling to -10°C. TEC driver is included. Needs +5 VDC supply or bias battery.
|
| 51 | TERM-50-BNC |
External 50 Ohm terminating RF-load with a BNC connector and BNC-T-piece (recommended when UPD is used in
combination with any of the BBA amplifiers or oscilloscopes with 1 MOhm input impedance).
|
| 52 | TERM-50-SMA |
External 50 Ohm terminating RF-load with a SMA connector and SMA-T-piece (recommended when UPD is used in
combination with any of the BBA amplifiers or oscilloscopes with 1 MOhm input impedance).
|
| 53 | PS-UPD-12-WW | Low-Noise Power Supply for the UPD Photodetectors, universal input: 100 … 240 V AC (worldwide), output: 12 V DC. |
| 54 | PS-UPD-9-WW | Low-Noise Power Supply for the UPD Photodetectors, universal input: 100 … 240 V AC (worldwide), output: 9 V DC (matched to UPD-30-VSG-P photodiode). |
| 55 | PS-UPD-5-WW |
Low-Noise Power Supply for the UPD Photodetectors, universal input: 100 … 240 V AC (worldwide), output: 5 V DC (matched to UPD-15-IR2-FC, UPD-15-IR2-P, UPD-15-UVIR- FC, UPD-3N-IR2-P, UPD-2M-IR2-P and UPD-5N-IR2-P
photodiode).
|
| 56 | BAT-UPD-6V | Bias Battery for the UPD Photodetectors, 6 V. |
| 57 | BNC-UPD-1M | BNC(m) / BNC(m) cable 50 Ohm impedance, RG58, 1 m long. |
| 58 | SMA-UPD-1M | SMA(m) / SMA(m) cable 50 Ohm impedance, RG174, 1 m long. |
| 59 | SMA-BNC-AD | SMA(m) / BNC(f) adapter: SMA: male, BNC: female. Gold coated. |
| 60 | UPD-FH |
Filter holder for up-to 3 filters, each up-to 4.5 mm thickness, to be attached in front of the UPD photodiode (filters are NOT
included).
|
| Avalanche Si and InGaAs Photodiodes | ||
| 61 | UPD-350-SIA-SP |
Ultrafast Avalanche Si Photodiode, rise time typ. 350 ps, bandwidth > 1 GHz, spectral range 320 … 1100 nm, sensitive area 500 µm diameter (0.2 mm²),
quantum efficiency > 80 %, gain factor max. M=100, BNC connector for the RF output.
Needs power supply PS-UPD-AV.
|
| 62 | UPD-350-SIA-UP |
Ultrafast Avalanche Si Photodiode, UV-enhanced, rise time typ. 350 ps, bandwidth > 1 GHz, spectral range
200 … 1100 nm, sensitive area 500 µm diameter (0.2 mm²), quantum efficiency > 80 %, gain factor max. M=100,
MgF2 window, BNC connector for the RF output. Needs power supply PS-UPD-AV.
|
| 63 | UPD-350-SIA-UD |
Ultrafast Avalanche Si Photodiode, UV-enhanced, rise time: < 350 ps, bandwidth > 1 GHz, spectral range
200 … 1100 nm, sensitive area 500 µm diameter (0.2 mm²), quantum efficiency > 80 %, gain factor max. M=100, quartz diffuse window, BNC connector for the RF output.
Needs power supply PS-UPD-AV.
|
| 64 | UPD-250-IGA-SP |
Ultrafast Avalanche InGaAs Photodiode, rise time:
< 250 ps, bandwidth > 1.5 GHz, spectral range 800 … 1700 nm,
sensitive area 200 µm diameter (0.031 mm²), quantum efficiency
> 80 %, gain factor typ. M=20, BNC connector for the RF output.
Needs power supply PS-UPD-AV.
|
| 65 | UPD-500A-TIA |
Ultrafast Avalanche Si Photodiode with integrated transimpedance amplifier, rise time: < 500 ps, bandwidth > 1 GHz, spectral range 320 … 1100 nm,
sensitive area 500 µm diameter (0.2 mm²), quantum efficiency
> 80 %, transimpedance sensitivity: 110 kV/W, BNC connector for the RF output.
Needs power supply PS-UPD-AV.
|
| 66 | PS-UPD-AV |
Power Supply for the avalanche Photodetectors,
universal input: 100 … 240 V AC (worldwide), output matched to the avalanche photodiode.
|
| Balanced Photodetectors | ||
| 67 | Option: UPD-BAL | Balanced photodetector option for all listed above photodetectors. Two power supplies included. |
| 68 |
Option:
UPD-BAL-TIA
|
Amplified balanced photodetector option for all listed above photodetectors with transimpedance amplifier, 25x gain,
DC to 3 GHz
|
| 69 |
Option:
UPD-BAL-AMP
|
Amplified balanced photodetector option for all listed above photodetectors with broadband BBA amplifier of your choice (except BBA-100 and BBA-100-VG) |
| Photodetector Modules, Very High Gain | ||
| 70 | PDM-UVIR-720 |
Ultrafast Photodetector Module
Spectral range 185 … 720 nm, large sensitive areа: 8 mm
diameter, variable gain > 106, peak sensitivity @ 400 nm: 5.5 Megavolts/W, rise time typ. 500 ps with 50 Ohm load.
|
| 71 | PDM-UVIR-710 |
Ultrafast Photodetector Module
Spectral range 230 … 710 nm, large sensitive areа: 8 mm diameter, variable gain > 106, peak sensitivity @ 600 nm:
6.5 Megavolts/W, rise time typ. 500 ps with 50 Ohm load.
|
| 72 | PDM-UVIR-920 |
Ultrafast Photodetector Module
Spectral range 230 … 920 nm, large sensitive areа: 8 mm
diameter, variable gain > 106, peak sensitivity @ 600 nm: 4 Megavolts/W, rise time typ. 500 ps with 50 Ohm load.
|
| 73 | PDM-UVIR-710-P |
Ultrafast Photodetector Module for photon counting Spectral range 230 … 710 nm, large sensitive areа: 8 mm diameter, variable gain > 106, peak sensitivity @ 600 nm:
6.5 Megavolts/W, rise time typ. 500 ps with 50 Ohm load.
|
| 74 | PDM-UVIR-850-P |
Ultrafast Photodetector Module for photon counting
Spectral range 185 … 850 nm, large sensitive areа: 8 mm
diameter, variable gain > 106, peak sensitivity @ 600 nm: 4 Megavolts/W, rise time typ. 500 ps with 50 Ohm load.
|
| Broadband Pulse Amplifiers: BBA Series | ||
| 75 | BBA-3 |
Broadband Inverting Amplifier,
bandwidth 50 kHz to 14.5 GHz, gain 10 dB (> 3x amplitude), Gain flatness: +/-5 dB for f < 4 GHz;
rise time: typ. 22 ps, max. power out: +12 dBm (100 MHz),
+14 dBm (5 GHz), + 11 dBm (10 GHz)
Effective RMS input noise: 112 µV, maximum RF in: + 10 dBm, peak: 1 V, return loss (100 MHZ) S11 input: 15 dB,
S22 output: 18 dB, SMA-connectors, needs +12 VDC supply.
|
| 76 | BBA-20-10 |
Broadband AC-coupled Inverting Amplifier, bandwidth 100 kHz … 10 GHz,
Typical values: gain 20 dB (10x amplitude) @ 10 GHz,
gain 27 dB (22x amplitude) @ 5 GHz, Noise figure: 5 dB @ 5 GHz
Max. power out (IP3): +28 dBm (5 GHz), +22 dBm (10 GHz) SMA female connectors, needs +12 VDC supply.
|
| 77 | BBA-9-5 |
Broadband AC-coupled Inverting Amplifier, bandwidth 0.05 … 5 GHz, gain 19 dB @ 4 GHz (> 9x
amplitude), cascadable, SMA connectors, needs +5 VDC supply.
|
| 78 | BBA-10 |
Broadband AC-coupled Inverting Amplifier, bandwidth 0.01 … 3 GHz, gain 21 dB @ 1 GHz (> 10x
amplitude), SMA connectors, needs +9 VDC supply.
|
| 79 | BBA-15 |
Broadband AC-coupled Inverting Amplifier,
bandwidth 0.01 … 2 GHz, gain 24.5 dB (15x amplitude), needs
+9 VDC supply.
|
| 80 | BBA-10-4HP |
Broadband AC-coupled Inverting Amplifier, 0.01÷ 4 GHz, gain 19.4 dB (9x amplitude), SMA connectors (female),
needs +9 VDC supply.
|
| 81 | BBA-100 |
Broadband AC-coupled Non-Inverting Amplifier, bandwidth 0.01 … 2 GHz, rise time typ. 300 ps,
gain 43.5 dB (> 100x amplitude), SMA connectors (female), needs +9 VDC supply.
|
| 82 | BBA-100-VG |
Broadband AC-coupled Non-Inverting Amplifier, bandwidth 0.01 … 2 GHz, variable gain 0 … 43.5 dB (0 … >
100x amplitude), SMA connectors (female), needs +15 VDC supply.
|
| 83 | TERM-50-INT | Integrating a 50 Ohm terminating RF-load at the input of the any of the above amplifiers (recommended when used in combination with the UPD-series photodiodes). |
| 84 | BBA-2W-P |
Broadband High-Power Amplifier,
bandwidth 50 MHz … 1 GHz, gain 20 dB, peak output power: 4 W, average power: 2 W, BNC connectors, needs 24 V / 1 A supply (not included).
|
| 85 | PS-BBA-05-WW |
Low-Noise Power Supply for BBA Amplifiers,
universal input: 100 …240 V AC (worldwide), output +5 VDC.
|
| 86 | PS-BBA-09-WW |
Low-Noise Power Supply for BBA Amplifiers,
universal input: 100 … 240 V AC (worldwide), output +9 VDC.
|
| 87 | PS-BBA-15-WW | Low-Noise Power Supply for BBA-100-VG Amplifiers, universal input: 100 … 240 V AC (worldwide), output +15 VDC. |
| 88 | PS-BBA-12-WW |
Low-Noise Power Supply for BBA Amplifiers, universal input: 100 … 240 V AC (worldwide),
output +12 VDC / 1 A.
|
| 89 | PS-BBA-24-WW |
Low-Noise Power Supply for BBA Amplifiers,
universal input: 100 … 240 V AC (worldwide), output +24 VDC / 1 A.
|
| Infrared-To-Visible Converters: IR-VIS Series | ||
| 90 | IR-VIS-40-D |
Infrared-To-Visible Converter, for high-power Nd:YAG lasers, special ceramics, no bleaching. Needs no activation with UV light, active area 2x Ø 38 mm (total 23 cm²), sensitivity
800 … 1100 nm and 1460 … 1600 nm, DOUBLE SIDED!
|
| Advanced Digital High-Speed High-Sensitivity CCD Line Cameras with USB 2.0 Interface CCD-S3600-D(-UV) | ||
| 91 | CCD-S3600-D |
Advanced digital high-speed CCD line camera, 3648 pixels with elongated pixel size (8x200 µm) for high sensitivity, spectral range 320 … 1100 nm, 16-bit ADC, large 32 MB of fast DDR2 onboard RAM, max. 269.5 fps, high-speed USB 2.0, plug & play, built-in TTL trigger input & output, USB-powered.
Includes drivers, libraries & applications for LabVIEW & C++. Supports Windows 11/10/8/7/Vista/XP, Linux, Mac OS X, etc.
Housing: 90 x 25 x 105 mm³ (W x H x D), including USB 2.0 signal & power supply cable for interfacing to a computer.
|
| 92 | CCD-S3600-D-UV |
Advanced digital high-speed CCD line camera, 3648 pixels with elongated pixel size (8x200 µm) for high sensitivity, UV to IR spectral range 200 … 1100 nm, 16-bit ADC, large 32 MB of fast DDR2 onboard RAM, max. 269.5 fps, high-speed USB 2.0, plug & play, built-in TTL trigger input & output, USB-powered. Includes drivers, libraries & applications for LabVIEW & C++.
Supports Windows 11/10/8/7/Vista/XP, Linux, Mac OS X, etc.
Housing: 90 x 25 x 105 mm³ (W x H x D) including USB 2.0 signal & power supply cable for interfacing to a computer.
|
| 93 | CCD-S3600-D-UV-E |
Advanced digital high-speed CCD line camera, 3648 pixels with elongated pixel size (8x200 µm) for high sensitivity, UV- enhanced, NO PROTECTING WINDOW, spectral range 170 … 1100 nm,
16-bit ADC, large 32 MB of fast DDR2 onboard RAM, max.
269.5 fps, high-speed USB 2.0, plug & play, built-in TTL trigger input & output, USB-powered. Includes drivers, libraries & applications for LabVIEW & C++. Supports Windows 11/10/8/7/Vista/XP, Linux, Mac OS X, etc.
Housing: 90 x 25 x 105 mm³ (W x H x D) including USB 2.0 signal & power supply cable for interfacing to a computer.
|
| 94 | CAB-TRIG-CCD-D |
Trigger cable for trigger input or trigger output for
CCD-3600-D(-UV), SMB connector on the CCD side, BNC on the other side, length 100 cm. ONLY for CCD-S3600-D(-UV)!
|
| High-Sensitivity Linear CCD Arrays with Analog Output CCD-2000M(-UV) | ||
| 95 | CCD-2000M |
CCD Array, 2048 pixels, elongated pixel size 14x200 µm for high sensitivity, spectral range 320 … 1100 nm, with analog
driver, OEM.
|
| 96 | CCD-2000M-V | CCD Array, 2048 pixels, UV-sensitive spectral range 250 … 1100 nm, elongated pixel size 14x200 µm for high sensitivity, with driver, OEM. |
| 97 | PS-CCD-EU | AC-DC Adapter for CCD-2000M(-UV) Array, input: 220 … 240 V AC (European standard), output: +7.5 VDC, stabilized, low noise. |
| 98 | PS-CCD-WW |
AC-DC Adapter for CCD-2000M(-UV) Array, universal input:
100 … 240 V AC (worldwide), output: +7.5 VDC, stabilized, low noise.
|
| 99 | CAB-SIG-CDM |
Signal Cable, connectors SMB to BNC, length 100 cm.
For CCD-2000M(-UV) ONLY!
|
| 100 | CAB-TRIG-CDM |
Trigger Cable, connectors SMB to BNC, length 100 cm.
For CCD-2000M(-UV) ONLY!
|
更多產品信息，請聯係蘇州波弗（fú）光電科技有限公司相關銷售（shòu）人員獲取。
